SPONSORED LINKS
Here's how the N64's video works. The video is generated by the Reality Co-Processor
and clocked into the DAC through a bus 7 bits wide. This video data consists of four (7
bit) bytes synchronised with the 50Mhz Clock signal. There is another signal, I'll call it
!DSYNC, which is active on the first byte of each four byte set.
The problem with the N64 is that it's DAC doesn't output RGB (with the exception of a few
early NTSC consoles with the VDP-NUS DAC), the RGB video is encoded as Composite and
S-video internaly. It is for this reason that I have created an RGB video DAC: To connect
in parallel with the existing DAC and fulfill this missing function that Nintendo so
carelessly omitted.
My RGB DAC is made from a CPLD (Complex Programmable Logic Device) which latches the
video data and drives an R2R resistor ladder to make an analog video signal. The analog
video is wired to the unused pins on the A/V port in the same configuration as the SNES.
Resources
Circuit Diagram
CPLD Pinout
Assembly Procedure - Instructions for building and installing
this device inside a N64.
JDEC Programmer File - For the XC9536XL CPLD.
AHDL Code - This was automatically generated from a schematic
capture so I'm not sure how much use it is.
Pinouts for the various N64 DAC ICs
... 29/1/07
<-- BACK TO INDEX
