SHOW / HIDE

Review   Mail order   Warranty   Back   RamCard    Faq & Download. 
Gblogo1.jpg (224389 bytes)

        

1. What is Game Jack
GJusage.JPG (81694 bytes)

  

GB Game Jack is a device that allows data to be transferred back and forth GB Ram card and any computer that has a parallel port.

The advanced design of the GB card and  GB GameJack makes it easy for programmers and coders to burn a ROM file to the  GB Ram card. To transfer data into the  GB Ram card, the only requirements are the  GB GameJack, PC and our customized software. No need for expensive and difficult to use EPROM burner.


Parallel/Printer port -  GB GameJack has a built-in PC standard parallel/printer port, it does not require expensive PC parallel/printer port adapters and thus, there are no hidden costs involve. There are also no difficult, troublesome ISA/PCI cards to install and no need to dismantle the computer. User can use any computer without installing or dismantling any ISA/PCI cards. The  GB GameJack is hassle-free and works fine with all computers that has standard ECP PC parallel/printer port, including notebooks. It takes about 15 seconds to upload a 4 Mbits file to the  GB RAMcard (4M), 100 seconds for a 16mbits file to a GB RAM Card (16M).

Cartridge Slot - Standard original game cartridge compatible slot, works with  GB RAM card and any original game cartridge. The front of the  GB RAM card should be facing up and the cartridge can only be inserted one way. Please do not force the original game cartridge into the slot, it should fit in nicely.

Power Supply -  GB GameJack operates on a 7V-12V, 150ma or above DC power supply. The center point polarity of the power supply plug to the GB GameJack is negative (-).

Battery Compartment - The GB GameJack has a battery compartment and fit Only One 9V  batteries. . Batteries are not used when   GB GameJack is attached to DC power supply. DC power supply does not included in the package. An 9V battery is included.

ASIC -GB GameJack has a built-in asic fully developed by ALTERA..

BETTER FEATURE THAN THE OTHERS

GB GAMEJACK Price List.

Item Description Price
GB GAME JACK + CD + 4M RAM CARD US$50
GB GAME JACK + CD + 16M Ram Card US$70
GB GAME JACK + CD + 64M RAM CARD US$80
GB GAME JACK + CD  US$30
GB 4M RAM CARD US$22
GB 16M RAM CARD US$45
GB 64M RAM CARD with Rumble feature US$55***

** all 64M are build in Rumble, it work on Pokemon Pinball.  ( on promotion )

All price are include shipping charge by air mail to world-wide.

<GB GAMEJACK USER MANUAL>

<ROM Back-up> Mode

ROM Back-up mode can duplicate the GB GAME to GB blank cart.

  1. Turn off the GB GAMEJACK.
  2. Put Source cart on SLOT1, put GB blank cart on SLOT2.
  3. Turn on the switch to “ON”. (“OK” & “ROM Back-up” LED turn on light)
  4. Push the START switch to start duplicating. (“OK” LED lights out, “BUSY” LED turn on light and turn 4 mode LEDs on and off by turns. If “BUSY” LED is blinking, this state means that source cart on SLOT1 is not real ROM cart (copying cart).
  5. After some seconds, duplicating will be completed. (“OK” & “ROM Back-up” LED turn on light)

<ROM Verify> Mode

ROM Verify mode can verify the ROM data between SLOT1 and SLOT2.

  1. Turn off the GB GAMEJACK.
  2. Put source cart on SLOT1, put a cart back-upped on SLOT2.
  3. Turn on the switch to “ON”. (“OK” & “ROM Back-up” LED turn on light).
  4. Push the MODE switch one time to changing mode to ROM Verify mode. (“ROM Verify” LED turn on light).
  5. Push the START switch to start verifying. (“OK”LED lights out, “BUSY”LED turn on light and turn 4 mode LEDs on and off by turns)
  6. After some seconds, verifying will be completed. (“OK” & “ROM Back-up” LED turn on light)

If “BUSY”LED is blinking, ROM data on SLOT2 is different from ROM data on SLOT 1

<RAM Backup> mode

RAM Back-up mode can duplicate the RAM date on SLOT1 to SLOT2.

  1. Turn off the GB GAMEJACK.
  2. Put source cart on SLOT1, put destination cart on SLOT2.
  3. Turn on the switch to “ON”. (“OK” & “ROM Back-up” LED turn on light).
  4. Push the MODE switch two times to changing mode to RAM Back-up mode. (“RAM Back-up” LED turn on light)
  5. Push the START switch to start duplicating. (Turn 4 mode LEDs on and off by turns).
  6. After few seconds, duplicating will be completed. (“OK” & “ROM Back-up” LED turn on light).

<RAM Erase> Mode

RAM Erase mode can erase the RAM data on SLOT2.

  1. Turn off the GB GAMEJACK.
  2. Put a cart on SLOT2.
  3. Turn on the switch to “ON”. (”OK” & “ROM Back-up” LED are lighting)
  4. Push the MODE switch three times to changing mode to RAM Erase mode. (“RAM Erase” LED turn on light).
  5. Push the START switch to start erasing. (turn 4 mode LEDs on and off by turns).
  6. After a few seconds, erasing will be completed. (“OK” & “ROM Back-up” LED are lighting).

<Check ROM Size>

  1. Turn off GB GAMEJACK.
  2. Put a cart wanted to check on SLOT1.
  3. Press mode button then hold it.
  4. Switch to “ON” side.
  5. The state of 4 mode LEDs means ROM size as follows

“ROM Back-up” LED is lighting : 4mb or less (MBC1 or 2 or 5)

“ROM Verify” LED is lighting : 8mb (MBC5)

“ROM Verify” LED is blinking : 8mb (MBC1)

“RAM Back-up” LED is lighting : 16mb (MBC5)

“RAM Back-up” LED is blinking : 16mb (MBC1)

“RAM Erase” LED is lighting : 32mb (MBC5)

<Test Mode >

  1. Turn off GB GAMEJACK.
  2. Press start button & mode button then hold them.
  3. Switch to “PC” side.
  4. You will confirm all LEDs are lighting.

If any LED is not lighting, GB GAMEJACK is not working properly. Meaning that all LED must be lighting if it is working properly.

<GB GameJack Up/Down Load Utility Installation, Windows 95 or upper version>

  1. Insert “GB GameJack CD-ROM” into your CD-ROM drive and select your CD-ROM drive
  2. Double click the file “setup.exe” from the “GB GameJack CD-ROM” and enter into the window of “GameBoy Flash ROM Tools Setup”.
  3. Click “Next” and select the destination directory for the “GameBoy Flash ROM Tools”. (The destination directory has been defaulted to C:\Program Files\GB. You can install to this directory by click “Next” OR choose to install to a different directory by click “Browse”)
  4. Then go to the window of “Select program folder”. Setup will add program icons to the Program Folder. You may type a new folder name or select one from the existing folder list. Then click “Next” to continue.
  5. Now Setup has finished copying files to your PC. Then click “Finish” to complete setup. The “GameBoy Flash ROM Tools” has been already installed.

<Up and Down Load Data>

  1. Shut down your PC.
  2. Connect a parallel printer cable from GB GameJack to your PC printer port. It must be an “ECP” printer port.
  3. Switch GB GameJack to PC.
  4. Restart your PC.
  5. Select the file “GB Tools.exe” from the folder “GB” and go to the “GB Flash ROM Tools” window.
  6. The default for “Delay cycle for the printer Port” is 2.
  7. * If any communication errors occur during your operation, please try any no. from 0-20.

  8. Transfer game data from GB GameJack to PC:-
  9. Select “Dump ROM to file” in the “GB Flash ROM Tools” window and save the game file to PC.

  10. Transfer game data from PC to GB GameJack:-
  11. Select “Upload ROM from file” in the “GB Flash ROM Tools” window and choose the game to download to the GB GameJack.

  12. Transfer SRAM data from GB GameJack to PC:-
  13. Select “Dump SRAM to file” in the “GB Flash ROM Tools” window, then choose the bank no. and save the SRAM data to PC.

  14. Transfer SRAM data from PC to GB GameJack:-
  15. Select “Upload SRAM from file” in the “GB Flash ROM Tools” window, then choose the bank no. and download the SRAM data to GB GameJack.

  16. Transfer bios from GB GameJack to PC:-
  17. Select “Dump bios to file” in the “GB Flash ROM Tools” window and save the bios to your PC.

  18. Transfer bios from PC to GB GameJack:-

Select “Upload bios from file” in the “GB Flash ROM Tools” window, and choose the bios file to download to the GB GameJack.

<<GB 遊戲互玩通>>操作指引 ( Chinese user manual )

<ROM BACK UP制式>

ROM BACK UP 制式可以複製GB的遊戲到空帶上。

  1. <<GB 遊戲互玩通>>的電源關掉。
  2. 把要複製的GB遊戲盒帶放入SLOT1, 空白盒帶放入SLOT2
  3. 電源制選擇”ON”, 當接上電源後, “OK” ”ROM BACK-UP”指示燈會亮著。
  4. ”START”制開始複製遊戲, 這時, “OK” 指示燈會熄滅, “BUSY”指示燈會亮著。(四
  5. 個制式顯示燈會輪流不停眨動)

    如果”BUSY”指示燈在不停眨動,這說明那盒在SLOT1GB遊戲盒帶是複製的。

  6. 不一會,複製便會完成,這時,”OK” ”ROM BACK UP”指示燈亮著。

<ROM VERIFY 制式>

ROM VERIFY制式能夠核對在SLOT1 SLOT2的記憶資料是否一樣。

  1. GB GAMEJACK 的電源關掉。
  2. 把原裝的GB遊戲盒帶放入SLOT1, 已備份的盒帶放入SLOT2
  3. 電源制選擇 “ON”, “OK” ”ROM BACK UP”指示燈亮著。
  4. MODE制一次, 便會轉到ROM VERIFY 制式。(“ROM VERIFY”指示燈會亮著)
  5. “START’制開始核對, 這時, “OK”指示燈會熄滅, “BUSY”指示燈會亮著。(四個制式顯示燈會輪流不停眨動)
  6. 幾秒後, 核對便會完成, (OKROM BACK-UP指示燈會亮著), 如果”BUSY” 指示燈在不停眨動, SLOT1帶與SLOT2帶的記憶資料就是不同。

<RAM BACK UP>制式

RAM BACK UP制式能複製SLOT1 的記憶資料到SLOT2

  1. GB GAMEJACK 的電源關掉。
  2. 把來源盒帶放入SLOT1, 目的盒帶放入SLOT2
  3. 電源制選擇 “ON”, “OK” ”ROM BACK-UP” 指示燈亮著。
  4. MODE 制二次, 便會轉到RAM BACK UP制式。(“RAM BACK UP”指示燈亮著)
  5. START制開始複製資料。(四個制式顯示燈會輪流不停眨動)
  6. 不一會, 複製完成。(“OK” ”ROM BACK-UP” 指示燈亮著)

<RAM ERASE>制式

RAM ERASE制式可刪除SLOT2 的記憶資料。

  1. GB GAMEJACK 的電源關掉。
  2. 把要刪除的盒帶放入SLOT2
  3. 電源制選掉 “ON”, “OK” ”ROM BACK-UP” 指示燈亮著。
  4. MODE 制三次, 便會轉到RAM ERASE制式。(“RAM ERASE” 指示燈亮著)
  5. START制開始刪除資料。(四個制式顯示燈會輪流不停眨動)
  6. 當洗掉資料完成後,OK” ”ROM BACK-UP” 指示燈亮著。

<檢查ROM SIZE>

GB GAMEJACK 的電源關掉。

  1. 將所要檢查的盒帶放入SLOT 1
  2. 按實MODE制。
  3. 電源制選擇 “ON”
  4. 4個指示燈的狀態代表不同的ROM SIZE, 說明如下:

“ROM BACK-UP” 指示燈亮著 : 4MB或以下(MBC1 MBC2MBC5)

“ROM VERIFY” 指示燈亮著 : 8MB (MBC5)

“ROM VERIFY” 指示燈眨動 : 8MB (MBC1)

“RAM BACK-UP” 指示燈亮著 : 16MB (MBC5)

“RAM BACK-UP” 指示燈眨動 : 16MB (MBC1)

“RAM ERASE” 指示燈亮著 : 32MB (MBC5)

<測試制式>

  1. GB GAMEJACK 的電源關掉。
  2. 按實 “START” “MODE” 制。
  3. 電源制選擇 “PC”
  4. 確定所有, 指示燈亮著。

*如果其中有指示燈沒有亮著, GB GAMEJACK不能正常運作。

*如果所有指示燈亮著, GB GAMEJACK可以正常運作。

<安裝互玩通上載及下載資料程式, 視窗95或更高版本>

  1. 放入 “GB GAMEJACK CD-ROM” 於光碟機中, 並選擇閣下之光碟機。
  2. “GB GAMEJACK CD-ROM” 選取 “setup.exe” 檔案。
  3. “GameBoy Flash ROM Tools Setup” 視窗中, “Next”, 選取 “GameBoy Flash ROM Tools” 將要拷貝到的地方; 基本設定是 C:\Program Files\GB , 閣下可根據本身要求, “Browse” 選取其他目錄。
  4. “Next” 開啟 “Select Program Folder” ; 其基本設定之 “Program Folder” 名稱為 “GB Tools”, 閣下可根據需要, 更改有關名稱。
  5. “Next” 之後, 有關之程式便會自動安裝, “Finish” 完成。

<上載及下載資料>

  1. 先關掉你的PC
  2. 用一條平衡印表機連接線將互玩通連接到PC的印表機連接埠(請確定印表機連接埠是 “ECP”)
  3. 把互玩通開啟至 “PC” 制式。
  4. 開啟你的PC
  5. 從資料夾 “GB” 選擇 “GB Tools.exe”, 進入“GB Flash ROM Tools” 視窗。
  6. “Delay cycle for the printer port” 欄目中, 預設值是2
  7. **** 如在運作中出現傳送錯誤, 請調整以上數值, 嘗試020任何一個數

    字。

  8. 把遊戲資料由互玩通上載至PC:-
  9. “GB Flash ROM Tools” 視窗中選擇 “Dump ROM to file” 檔案, 儲存遊戲資料到閣下所需之Folder

  10. 把遊戲資料由PC下載到互玩通:-
  11. “GB Flash ROM Tools” 視窗中選擇 “Upload ROM from file” 檔案, 選取閣下所需之遊戲下載到互玩通。

  12. SRAM 資料由互玩通上載到PC:-
  13. “GB Flash ROM Tools” 視窗中選擇 “Dump SRAM to file” 檔案, 選取Bank no., 儲存SRAM資料到閣下所需之Folder

  14. SRAM 資料由PC下載到互玩通:-
  15. “GB Flash ROM Tools” 視窗中選擇 “Upload SRAM from file” 檔案, 選取Bank no., 下載所需之SRAM資料到互玩通。

  16. Bios由互玩通上載至PC:-
  17. “GB Flash ROM Tools” 視窗中選擇 “Dump bios to file” 檔案, 儲存Bios資料到閣下所需之Folder

  18. BiosPC下載到互玩通:-

“GB Flash ROM Tools” 視窗中選擇 “Upload bios from file” 檔案, 選取閣下所需之Bios資料下載到互玩通。